Most system designers use voltage references in their circuits. While many will agree that the performance may ultimately be limited by the reference, they are often unclear as to why. With so many reference products available, designers often choose based on a tradeoff between price and precision, using only initial accuracy and TC specs as a measure of precision. As applications have evolved, so have voltage references. Features such as noise, thermal stability, load and line regulation and size may be just as important as, or more important than, the more obvious precision specifications. Three new products from LTC, the LT6654, LTC6655 and LT6656, have carefully chosen combinations of features and specifications to make them especially compatible with common types of applications.

Networks & Channels

• News
  • Latest News
  • Interviews
• EE Life
  • Ingenious Inventions
  • Engineering Culture
• Embedded
  • Latest ESC Events
  • Teardowns
• Products
  • Demos and How-Tos
  • Teardowns
• Events
  • ESC Silicon Valley 2010
  • ESC Boston 2010
  • ESC Chicago 2010
  • ESC Silicon Valley 2009
  • ESC Boston 2009
  • ESC Archive
• Vendor Expert Videos
• Linear Video Channel
• Drive for Innovation
• EE Times Live Stream
  • DAC 2011
  • DAC 2012

• High Efficiency Bidirectional Cell Balancer Maximizes Capacity and Lifetime of Series Connected Battery Stacks

  Large, series connected strings of batteries are commonly used in electric vehicles, backup power systems and a wide variety energy storage applications. Maximizing the lifetime and ensuring safe usage of such battery stacks requires accurate meas...
• 60V High-Current Step-Down LED Driver Controller

  The meaning of the term “high power LED” is rapidly evolving. Although a 350mA LED could easily earn the stamp of “high power” a few years ago, now, 5A to 40A LEDs and laser diodes are used in the DLP projector, surgical equipment, stage lighting, au...
• 38V, 10A DC/DC μModule® Regulator with Fault Protection Powers High-End ASICs and FPGAs

  Pulsed loading conditions and abnormal disturbances within the electrical systems found in industrial, vehicle, avionic and other harsh environments can induce wildly varying voltage transients (surges) on what is nominally a 24VDC or 36VDC distribut...
• LS8 Package Improves Stability of Voltage References

  Stability of precision electronic circuits is often dominated by the stability of the voltage reference. Most electronic systems rely on one or more voltage references to ensure that measurements or performance meets specifications, especially over ...
• 80V, 98% Efficient, 4-Switch Synchronous Buck-Boost Controller IC with 4 Regulation Loops Enable the Design of Many High Power and Flexible Power Conversion Circuits.

  In today’s modern electronic systems, the need for power conversion circuits that can do more then simply convert one voltage to another is growing. Some systems require a constant current, constant voltage output, while others may require a limit o...
• Floating Surge Stopper Provides Unlimited Overvoltage Protection

  Protecting sensitive electronic circuitry from voltage transients is an essential part of any system be it automotive, industrial, avionics or even battery-powered consumer applications. Linear Technology offers a wide variety of solutions for these ...
• Simple and Efficient Sub-2W Isolated Power Supply

  The non-synchronous flyback topology is widely used in isolated power supplies ranging from sub watt power levels to tens of watts. With more green-mode standards emerging around the world, improving light load efficiency and reducing no-load input s...
• New IC Technology Boosts Performance of Large Lithium Ion Battery Packs

  16kW-hr battery packs made from lithium ion cells are powering electric vehicles and storing grid energy. Measurement ICs like the LTC®6804 are used to extend the life and ensure the safety of the pack. The accuracy of the measurement IC can influenc...
• IF/RF Gain Block State-of-the-Art Performance the Easy Way

  Bandwidth has become more precious than gold. As we push more and more data wirelessly through our smartphones, tablets, GPS, and video players, the spectrum has become more crowded. Increasingly complex and efficient modulation schemes allow us to...
• Single Phase Step-Down DC/DC Controller with Digital Power System Management and Input Current Sense

  The digital power supply market has achieved rapid progress in the recent years. Easy configuration, accurate telemetry, convenient fault analysis and reliability are the trends for the modern digital power supply, which are all provided by Linear’s ...
• High Efficiency Dual 13A or Single 26A µModule Regulator

  Linear Technology’s LTM®4620 uses a proprietary lead frame design to package high power regulators into a very small form factor with effective thermal conduction through the top and bottom of the µmodule product. The device can be connected in paral...
• Optimizing the Performance of Wideband Zero-IF Receivers

  The zero-IF receiver architecture gains popularity in wireless applications because of its suitability to demodulate very wideband RF signals. This capability is important in digital pre-distortion (DPD) transmitters. Realization of sufficient dyna...
• Design a Simple, Efficient and Reliable Forward Converter

  Due to the high cost and inflexibility of isolated DC/DC converter modules, many designers are choosing to implement a discrete design that is better matched to their application. In particular, the forward converter with active clamp reset has been ...
• High Efficiency, Ultralow IQ, 42V, 2.5A Sync Buck Regulator

  The LT®8610 step-down regulator integrates key high performance features in one compact IC. It offers synchronous rectification, for efficiencies up to 96%. The low quiescent current of 2.5µA extends battery life and saves extra circuitry. High speed...
• 60V, 98% Efficient, 4-Switch Synchronous Buck-Boost Controller IC Regulates Voltage and Charges Batteries

  LEDs are becoming both more popular and more powerful. Strings of 1A, 2A, 3A and higher current LEDs found in vehicles, billboards, industrial lighting, and many more applications need to be driven both accurately and efficiently from DC/DC converter...
• Achieve 101dB SNR with the LTC2379-18

  Successive Approximation Register Analog-to-Digital Converters (SAR ADCs) are key components in instrumentation, industrial control, and test equipment applications. The accuracy, noise and speed of the SAR ADC often determine the overall system per...
• Matched Resistor Networks for Ultraprecision Applications

  Precision matched resistors are used in a wide range of precision instrumentation applications including measurement and data acquisition, wireless RF, networking, automated test, medical, industrial controls and military equipment. The LT®5400 is...
• Switcher Power Loss

  Efficiency is a misleading number for comparison of switching regulators. The efficiency number can be manipulated by the input and output voltage, while power loss is more tightly tied to the actual circuit. This video explains why.
• Synchronous Stepdown Regulator with Programmable Reference

  The standard design of a general purpose switching step-down regulator relies on a control loop that requires the user to attenuate the output signal to compare to a voltage reference. By thinking outside the box and designing a regulator that relie...
• Isolated Flyback Controller with PFC Controls Voltage or Current

  Linear Technology’s LT®3798 isolated controller with active power factor correction (PFC) is specifically designed for regulating bus voltages or driving constant current applications over a wide input range of 10V to 480V. It is ideal for constant v...
• Transform a DC/DC Converter into a High-Performance, Full-Featured Battery Charger

  Portable electronic devices, powered by batteries, require battery chargers. In higher powered applications, efficiency and thermal management requirements lead to solutions using DC/DC converters. DC/DC converter controllers do not have the accuracy...
• Instrumentation Applications for High Accuracy Temperature Monitor Products

  Thermal management is a critical part of system design. FPGAs and processors often require heat sinks and fans, to the extent that a failure (stopped fan or obstructed heat sink) would cause damage. These devices often have a pin connected to an on-d...
• Offline Isolated Flyback LED Controller with Active PFC

  The LT®3799/-1 isolated LED controller with active power factor correction (PFC) is specifically designed for driving LEDs over a wide input range of 24V to 480V+. It is ideal for LED applications requiring 4W to over 100W of LED power. The LT3799/-1...
• Low Phase Noise Frequency Synthesizers for RF Applications

  In modern RF communication systems, signal integrity is of prime importance. To meet the system requirements, amplifiers, mixers and modulators must have a low noise figure and low distortion products. Additionally, as system designers work to squeez...
• Wide VIN Range Step-Down Regulators Consume Only 2.8µA Input Current

  Battery life is paramount in modern battery-powered systems. Portable applications, such as remote sensors, require voltage regulators which have low current standby states and also able to provide bursts of high power. Linear Technology’s LT®3970...
• Precision Current Monitoring for Electric Motors, Solenoids and Inductive Loads

  Current information in electric motors and solenoids provides important insight into power output and system health. Electric motor and solenoid driving circuits and the devices themselves create a challenging environment for operation of current mon...
• Integration of Analog DC/DC Controller with Digital Power Management

  Modern electronics systems require high performance point of load power supplies with advanced and intelligent power management. Linear Technology’s LTC®3880 combines a best in class analog switching regulator controller with precise mixed signal dat...
• Minimizing Switching Regulator Residue in Linear Regulator Outputs

  Linear regulators are commonly employed to post-regulate switching regulator outputs. Benefits include improved stability, accuracy, transient response and lowered output impedance. Ideally, these performance gains would be accompanied by markedly re...
• Multicell Battery Stack Monitor IC for High Voltage Applications

  Stacks of lithium ion cells are used in new hybrid electric vehicles and uninterruptible power supplies. Maximizing the life and the safety of these high voltage, high power battery packs depends on sophisticated electronics. Linear Technology’s LTC®...
• Direct Paralleling, High Power Density LDO

  The LT3080 is a new architecture for linear regulators. It provides better regulation, a simple output adjustment with a single resistor where the output can be adjusted down to zero. Also, this architecture allows easy paralleling of regulators for ...
• PScope: Linear Technology’s High speed ADC data collection software

  When Linear Technology provides a customer with a high speed ADC demo board we also provide PScope, the software to evaluate the demo board. PScope is a simple software package that can collect, and display data from high speed ADC demo boards. It ...
• Introducing the LT®3070 Point-of-Load Regulator for FPGA & Server Backplanes

  Modern FPGA and Servers operating at low voltages are sensitive to subtle supply drops. The droop may result from a combination of excess regulator noise, insufficient bandwidth in the supply regulator, excess ESR & ESL in the decoupling components, ...
• Innovation Pushes State of the Art in Voltage References

  Most system designers use voltage references in their circuits. While many will agree that the performance may ultimately be limited by the reference, they are often unclear as to why. With so many reference products available, designers often choo...
• Using LTpowerPlay to Manage the LTC2978 Digital Power Monitor

  The LTC2978 features enable power supply supervision, monitoring, sequencing and trimming with unmatched accuracy. These features combined with our easy to use GUI, assist the power supply designer in defining and implementing complex power managemen...
• Virtual Remote Sense

  Compensating for unknown wire drops without remote sensing wires is now possible. The LT4180 continuously modulates the power supply output current to interrogate the line drop. Then the output is increased to match the drop providing up to a 50 to 1...
• 1ppm Settling Time Measurement for a New Monolithic DAC

  The LTC2753, a new 18-bit DAC, requires careful measurement techniques to verify performance. Performance verification at DC is relatively straightforward using precision Dvms. Dynamic conditions considerably complicate measurement. In particular, de...
• Maximum Power Point Control Simplifies Energy Harvesting

  There is an increasing market for low power electronic devices located in remote locations, away from the power grid. Ideally, the power for these devices should be generated on-site using renewable energy. Perhaps the most visible form of renewable ...
• High-Power Boost/SEPIC/Inverting DC/DC Converters with Fault Protection DC/DC Converters

  High-powered boost converters have historically suffered from the shortcoming that a DC path exists between the input and output nodes. Fault conditions, such as output shorts, could easily damage or destroy key components in this path. Other topol...
• Versatile, Easy-to-use, Accurate Timing Building Blocks

  General timing functions such as clocks, monostable one-shots, delays and pulse width modulators are ubiquitous. There is a wide range of functional requirements and an equally wide range of end use applications. Presently, general purpose timer chip...
• Energy Harvesting Applications

  Energy harvesting applications are finding their way into many remote monitoring applications where utility power is not available. New developments in ultralow power microcontrollers with their high level of integration are enabling monitoring syste...
• Low Power RF Mixers Enhance Receiver Performance

  RF mixers are critical components that make up the modern transceivers used in 3G and 4G wireless infrastructure, communication gears and military systems. The receivers’ robustness depends on their dynamic range performance. The LTC®5540/41/42/43 ...
• Synchronous PolyPhase Boost Converter for Cool and Powerful Applications

  Boost power conversion is important function in many industrial, automotive and commercial applications. Higher power level customers have to deal with issues of high ripple currents, high power dissipation and higher EMI levels. Linear Technology’s...